Description:
How to use Rama:
Step 1, remove the cover on the chainring, after removing , you can see the bottom bracket screw!
Step 2: Use the 14 sleeve function of the crankset tool 16MM open-end wrench to remove the bottom bracket screw
Step 3: Remove the bottom bracket screw and put it aside!
Step 4: Screw the black headgear into the chainring, remember to screw it to the end, otherwise it is possible to pull the threads on the chainring when setting the chainring!
Step 5: Screw the black headgear to the end.
Step 6: Screw the silver top rod into the headgear, screw it in by hand, and screw it to the end.
Step 7: Use a 16MM open-end wrench to screw in the ejector rod again. It will be a little harder to screw in here. It doesn`t matter, screw it in. screw it in a little bit, and it`s easy to !
Step 8: Screw the ejector pin to the end, and the chainring is ejected like this!
Specifications:
Product name: Crankset tool/square hole pull code/remover/crank remover
¡¼Name¡½Bicycle Crankset Tool
[Material] 45# carbon steel, quenching treatment, stronger hardness, chrome-plated surface
[Function] The bicycle chainring is disassembled, the ejector rod is lengthened, and the square mouth and spline chainring and crank can be disassembled, which is more practical and convenient.
¡¼Weight¡½120 grams
[Name] Bicycle Bottom Sleeve
[Material] 45# carbon steel, nickel plated on the surface
[Size] Length 4.8cm, maximum diameter 3.2cm
¡¼Weight¡½100G
¡¼Product Name¡½: Chain Cutter
[Product weight]: 128G
[Product details]: 45# steel quenching heat treatment (super hardness)
Package Included:
Bicycle repair tools*1