Parameter:
Product voltage: AC110V-220V/DC12V
Power: 20W
Size: 36*24*19cm
Plug: US standard EU standard
Scope of application: all kinds of eggs
Operation method:
Step 1: First add an appropriate amount of water to the hatching water bag and set aside.
Step 2: After receiving the incubator, lay the bottom heating pad flat. Place a water bag filled with water on the heating pad. The opening of the water bag is clamped to the foam box next to the incubator to prevent water from splashing out.
Step 3: Put the temperature sensor into the water bag and fix it with tape (it must be attached to the surface of the water bag and in contact with the water bag). When ready, lay the eggs.
Step 4: Start the test machine. After the temperature has stabilized, put the sterilized eggs evenly into the water bag of the incubator.
Step 5: In the incubator, after the hatched eggs are put in, cover the egg quilt with a breathable and warm quilt. It`s not too loose or too tight. The hatching process does not need to cover the lid of the incubator. If the temperature is low, cover the quilt well; if the temperature is high, do not cover it too tightly.
Step 6: Fill the watering can with water, put it in the machine, and keep the water temperature in the jug according to the temperature of the eggs. Spray water three days before hatching, 2-3 times a day.
Note:
1. Be sure to test whether the water bag leaks, otherwise there will be a risk of short circuit. Make sure that the covering material is breathable and that there is sufficient oxygen in the incubator.
Invert the eggs in the incubator daily (2-3 times/day). Do not turn the eggs to remove heat.
2. This product requires manual egg turning and automatic egg temperature control.
Package list:
Incubator *1
Mini nozzle *1
Alligator clip line*1
Transparent plastic bag*1
Quilt*1
US Plug Adapter * 1